SB-1000 Controller

The SB-1000 is an easy to use, compact dynamic balancing system that provides full functionality, including both an automatic and a manual balancing mode, at an entry-level price. This single machine control provides exceptional accuracy, capable of balancing to a tolerance as low as 0.02 microns peak-to-peak displacement over a spindle range of 300 to 30,000 RPM. With its digital design and intuitive icon-driven user interface, the SB-1000 is simple to install on existing equipment and can be easily integrated through the grinding machine CNC/PLC hardwire interface.

The SB-1000’s Manual Balance mode not only provides the most economical manual balancing solutions, it also provides real-time display of vibration and RPM levels. Operators can set alert and alarm thresholds through the CNC/PLC interface.

Operators can also utilize the Automatic Balance mode with the addition of a balance head and cable for rapid balance cycles controlled through the CNC/PLC interface, eliminating the need for operator interaction.

BenefitsTechnical DataManualsDatasheetsFirmware
  • The functionality of two products in one
  • Increases throughput by saving setup time
  • Improves part quality by automatically balancing to as low as 0.02 microns
  • Change balance mode with the push of a button
  • All-digital design increases operating life and reliability
  • Compact and easy to install and operate
  • Economical price
  • Longer life for grinding wheels, dressing wheels and spindle bearings
  • Works with all SBS installations and accessories
  • Easy CNC/PLC interface; USB 2.0 communication capability for firmware upgrades
  • Backed by world-class and worldwide customer service

Physical

Display
OLED Graphical Display
User Interface
Universal icon-driven (language independent)
Dimensions
210mm W x 112mm H x 33mm D
SB-5500 Compatible
Operates with existing balancers/cables, sensors, CNC/PCL hardwire interface
Power Input Requirements
Power Supply
24 VDC with terminal block connection, and M5 ground stud
Input Voltage:
+22 VDC to +26 VDC at 3.5 A max. Surge protected Negative protected (reverse protected from a non-grounded supply) Fused
Communications Interfaces
USB 2.0 (firmware upgrades only) CNC/PLC hardwire interface (opto-isolated outputs)

Performance

RPM Reporting
300 to 30,000 RPM
Wide Vibration Range
50 μg to 1.25g
Vibration Display Resolution
Four digit display with up to 2 decimal points in microns Display resolution to 0.01μm
Vibration Display Repeatability
6,000 RPM ±1% @ 5.0 μm 300 – 30,000 RPM ±2% @ 50:1 signal to noise
Vibration Display Accuracy
6,000 RPM ±2% @ 5.0 μm 300 – 30,000 RPM ±4% @ 50:1 signal to noise
Auto-Balance Resolution
0.02 microns displacement at 6,000 RPM
Vibration Filter
Custom digital filter has bandwidth +/- 3% of measurement RPM

Safety and Environmental

CE Certified
RoHS compliant
Environmental and Installation Conditions
Pollution degree 2 Intended for indoor user only Installation category I IP54, NEMA 12 Environmental temperature range: 5°C to +55°C Humidity: 0 to 85% relative humidity (non-condensing) throughout temperature range.